-HUD (Head-Up Display) projects driving data without requiring drivers to look away from their usual viewpoints
-HUD automatically adjusts its brightness level, so its projections are clearly visible in direct sunlight or at night.
-Alerts you if you exceed the speed limit by setting Over-speed buzzing alarm
-Projects a lot of driving information onto a transparent film on your windshield such as speed data, time, over speed alarm, compass, altitude
-5.5 inch LCD display, portable and easy for drivers to read data
-New high brightness screen, bright colors, image is clear and fine
-Detect all the important driving information via the OBD II system
- Plug and play design, easy installation
This W02 HUD only compatible with universal OBD II and EOBD interface, but incompatible with OBD I or JOBD.
Actually, OBD II and EOBD first applied to European and North American manufactured automobiles after 2003, and for Asian manufactured cars, they have even appeared later, since 2007. Besides, some cars, like Hummer and Savana, have special interface, may not compatible with this product.
Type: Head up display W02
Display type: Digital
Car Make: Cars with OBD II Interface
Product Size: (5.9 x 3.35 x 0.55) / (15 x 8.5 x 1.4) cm (L x W x H)
Screen Size: 5.5 inch
Environment: ~40c+80c atmospheric pressure 86-106kpa
Alarm sound level: >>=30db
Working voltage: DC9-16V
Working current: 40mA
Sleeping current: 15mA
Compass precision: ¡À1¡ã
Speed range: 0-400KM
1x OBD II Head up display
1x OBD Cable
1x Non-slip Mat
1x Reflecting Film
1¡Á User Manual
-If you find out that HUD displays only voltage for 30 seconds and then turn off automatically, this is because the interface isn¡¯t OBD II or EOBD. So we suggest checking twice whether your interface is OBD2/EOBD or not before purchase.
-For old cars, you should set your start voltage at 12.8V, for your battery is too old to provide 13.2V voltage.
-The speed this HUD displays is 5km faster than actual speed by factory default. You can fine tune or adjust it to your personal preference.