1. High brightness: The latest COB with 6000K cool white LED chip; 200% brighter than the existing halogen headlights. MINI1 technology ensures a perfect beam pattern without any black spots or fog lights.
2. Strong heat dissipation: The aluminum body is self-heating to ensure that your LED headlight bulbs exceed 50,000 hours of brilliant continuous light. The control driver features an intelligent control chip that monitors the current input for optimal thermal protection and performance and provides a wide voltage, constant current IC.
3. Simple installation: installation takes only 10 minutes. There are no relays. There are no capacitors. No extra wiring. Plug and play.
4.IP68 waterproof: It adopts integrated heat sink and aluminum body to self-heat, waterproof and heatproof. Even in extreme cases, the rain drive, the outer casing can work normally. Automatic short circuit protection.
Material: aluminum alloy
Style (model): H1 ,H4/HB2/9003 ,H7 ,H8/H9/H11, H10&9005&HB3, 9006&HB4
Light source: LED
Light color: white
Voltage: 9V to 36V. Wide-range voltage£¬constant urrent control£¬anti-interference circuit design.
Apprication: Upgrade for Car£¬Truck£¬SUV£¬RV HID Xenon Headlight£¬ALL IN ONE Style, no extra driver needed .
Long range£º6000K color temperature and 200m light range.
Protection grade: IP68
Fit model: universal model
Life: 50000 hours
Working temperature: -40¡æ--+80¡æ
2Pcs/set High Power LED Headlight Bulbs
1.both side could not work?
please turn around the plug (swap the polarity) and try again
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
3.both side flicker/interference/error light?
You car need a resistor Cancelers Decoders, Each car's original headlamp power is not the same, the system is not the same, there may be incompatible with the LED lights, it is recommended to check the car repair shop, the use of the decoder to eliminate the next fault code on it.
4.My bulb type is H1, but there is only one clip on my bulb and the one
you sent has two clip
Pls kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.
5.the bulbs is loss and it could not fit(H8/H9/H11/9005)
Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.